Temp sensor & amplifier
|
Temp sensor & amplifier |
|
|
|
|
|
  CDi Main | CDiComm | Controller | CDiNet | CDiBrowser | Outputs | pH
| DO | Wiring | Calibration | Pricing
| |
Submersible temperature sensor + amplifier module  |
  A complete temperature channel includes the sensor, junction box, and internal amplifier module. The
amplifier is necessary in industrial environments to filter out induced noise and to better match the sensor output
to the controller input. This is a full range sensor, capable of resolving -40 DegC to +150 DegC. The sensor does
not require calibration and is interchangeable with an accuracy of +- 0.5 DegC over the entire range. The combination
sensor and amplifier is capable of driving cable at least 1000 feet long. The amplifier module plugs into the CDi
analog backplane. For wiring details see the wiring page.You Get:  Semiconductor
temperature sensor with 10 ft (~3m) of cable, potted in a stainless-steel housing with thermal epoxy. Sensor is
electrically isolated from metal housing. It has a 2-wire interface, and connects directly to any input connector
on the CDi case.Factory
calibrated amplifier module, plugs into input backplane inside the CDi case.Quick
connector with 2 gold contacts Options: 4"x4"x2"
ABS liquid-tight junction box with 2 nylon strain-relief and liquid-tight connectors.Shielded,
2-wire instrumentation cable. |
|
[Home][Products][Email][Info][Links][Search] |
|
 |